供应玻纤20增强5VA阻燃PEI ULTEM 2210EPR
供应玻纤20增强5VA阻燃PEI ULTEM 2210EPR
产品价格：￥1.00（人民币）
  • 供应数量：10000
  • 发货地：广东-东莞市
  • 最小起订量：1千克
    • QQ洽谈 点击询价 进入商铺
    东莞鸿图工程塑胶
    免费会员
    会员级别：免费会员
    认证类型：未认证
    企业证件：未通过
    认证信息：未认证

    商铺名称：东莞鸿图工程塑胶

    联系人：朱淑芳（小姐）

    联系手机：

    固定电话：

    企业邮箱：htsjyl99@163.com

    联系地址：东莞樟木头塑料城一期W栋

    邮编：523263

    联系我时，请说是在新塑胶网上看到的，谢谢！

    商品详情

      供应玻纤20增强5VA阻燃PEI ULTEM 2210EPR

      内部脱模玻纤填充PEI ULTEM 2210EPR

      ULTEM  Resin 2210EPR

      PEI 基础创新塑料（美国）2210EPR

      ULTEM 2210EPR

      20%玻璃纤维填充,高流量Polyetherimide(Tg 217 c)与内部脱模和增强electroplatability。符合弗吉尼亚州ECO，阻燃UL94-V0和5VA 。注射成型。 

      典型的属性：

      MECHANICAL Value Unit Standard
      Tensile Stress, brk, Type I, 5 mm/min 1330 kgf/cm2 ASTM D 638
      Tensile Strain, brk, Type I, 5 mm/min 4 % ASTM D 638
      Tensile Modulus, 5 mm/min 70300 kgf/cm2 ASTM D 638
      Flexural Stress, brk, 2.6 mm/min, 100 mm span 2320 kgf/cm2 ASTM D 790
      Flexural Modulus, 2.6 mm/min, 100 mm span 70300 kgf/cm2 ASTM D 790
      Hardness, Rockwell M 114 - ASTM D 785
      IMPACT Value Unit Standard
      Izod Impact, unnotched, 23°C 49 cm-kgf/cm ASTM D 4812
      Izod Impact, notched, 23°C 6 cm-kgf/cm ASTM D 256
      Izod Impact, Reverse Notched, 3.2 mm 47 cm-kgf/cm ASTM D 256
      THERMAL Value Unit Standard
      Vicat Softening Temp, Rate B/50 220 °C ASTM D 1525
      HDT, 0.45 MPa, 6.4 mm, unannealed 210 °C ASTM D 648
      HDT, 1.82 MPa, 6.4 mm, unannealed 210 °C ASTM D 648
      CTE, -20°C to 150°C, flow 2.52E-05 1/°C ASTM E 831
      Relative Temp Index, Elec 170 °C UL 746B
      Relative Temp Index, Mech w/impact 170 °C UL 746B
      Relative Temp Index, Mech w/o impact 170 °C UL 746B
      PHYSICAL Value Unit Standard
      Specific Gravity 1.42 - ASTM D 792
      Water Absorption, 24 hours 0.19 % ASTM D 570
      Water Absorption, equilibrium, 23C 1.1 % ASTM D 570
      Mold Shrinkage, flow, 3.2 mm (5) 0.3 - 0.5 % SABIC Method
      Melt Flow Rate, 337°C/6.6 kgf 6 g/10 min ASTM D 1238
      ELECTRICAL Value Unit Standard
      Volume Resistivity 7.E+16 Ohm-cm ASTM D 257
      Dielectric Strength, in oil, 1.6 mm 26.3 kV/mm ASTM D 149
      Relative Permittivity, 1 kHz 3.5 - ASTM D 150
      Dissipation Factor, 1 kHz 0.0015 - ASTM D 150
      Dissipation Factor, 2450 MHz 0.0049 - ASTM D 150
      Arc Resistance, Tungsten {PLC} 6 PLC Code ASTM D 495
      Hot Wire Ignition {PLC) 1 PLC Code UL 746A
      High Voltage Arc Track Rate {PLC} 2 PLC Code UL 746A
      High Ampere Arc Ign, surface {PLC} 4 PLC Code UL 746A
      Comparative Tracking Index (UL) {PLC} 4 PLC Code UL 746A
      FLAME CHARACTERISTICS Value Unit Standard
      UL Recognized, 94V-0 Flame Class Rating (3) 0.4 mm UL 94
      UL Recognized, 94-5VA Rating (3) 1.9 mm UL 94
      Oxygen Index (LOI) 50 % ASTM D 2863
      NBS Smoke Density, Flaming, Ds 4 min 1.3 -

      ASTM E 662

    在线询盘/留言
    • 产品推荐
    精品推荐
    0571-87774297